Table of Contents
Advertisement
AutoOpen
In some programmes, the door auto-
matically opens slightly to assist the
drying process.
This programme option can be deactiv-
ated if you wish.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least 4 seconds until the Start in-
dicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Programme options
Press the programme selection
button 7 times.
The left indicator light will flash rapidly 7
times at intervals.
The flashing sequence in the display in-
dicates whether the AutoOpen pro-
gramme option is activated or not:
- : AutoOpen is activated
- : AutoOpen is deactivated
Press the Start button to change the
setting.
The setting is now saved.
Switch the dishwasher off with the
button.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate work-
tops when you open the door at the
end of the programme if the fan is no
longer running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
55
Advertisement
Table of Contents
