Assembly & Set-Up - MTD 02M Operator's Manual

Assembly & Set-Up
Contents of Carton
• Lawn Mower (1)
• Lawn Mower Operator's Manual (1)
• Registration Card (1)
Group 1
Group 2
Assembly
NOTE: This lawn mower is shipped without gasoline or oil in the
engine. Fill up the gasoline and oil as instructed in the Engine
Operator's Manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. While pushing in on both sides of the lower handle,
pull up and back on upper handle as shown in
Figure 3-1. Make certain the lower handle is seated
securely into the handle mounting brackets. Do not
crimp cable while lifting the handle up.
b. Tighten wing knobs to secure upper handle to lower
handle. Make sure that each carriage bolt is seated
properly in the handle.
• Chute Deflector (1)
• Engine Operator's Manual (1)
Hardware
Pack
Qty. 2
Qty. 2
Qty. 2
• Hardware Pack (1)
• Oil (1)
Qty. 2
Qty. 2
a
b
Figure 3-1
3
b
9