Advertisement
(*1)
The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling
and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of
certain Hazardous Substances. From July 1, 2006 , the RoHS Directive will prohibit any
marketing of new products containing lead.
Increasing attention is given to issues related to the global environmental. Toshiba Corporation
recognizes environmental protection as a key management tasks, and is doing its utmost to
enhance and improve the quality and scope of its environmental activities. In line with this,
Toshiba proactively promotes Green Procurement, and seeks to purchase and use products,
parts and materials that have low environmental impacts.
Green procurement of parts is not only confined to manufacture. The same green parts used in
manufacture must also be used as replacement parts.
(*2)
This product is manufactured using lead-free solder as a part of a movement within the CE
at large to
industry
be environmentally responsible
and repair of this product.
The melting temperature of lead-free solder is higher than that of leaded solder by
(
°C to
°C). Use of a soldering iron designed for lead-based solders to repair product made
30
40
with lead-free solder may result in damage to the component and or PCB being soldered. Great
care should be made to ensure high-quality soldering when servicing this product
when soldering large components, through-hole pins, and on PCBs
required to melt lead-free solder is high.
DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT !
GREEN PRODUCT PROCUREMENT
LEAD-FREE SOLDER
This product is manufactured using lead free solder
. Lead-free
solder must be used
WARNING
in the
servicing
°F to
°F
86
104
especially
as the level of heat
.
Advertisement
