Evoqua DEPOLOX Pool E Instruction Manual
  1. Manuals
  2. Brands
  3. Evoqua Manuals
  4. Water Filtration Systems
  5. DEPOLOX Pool E
  6. Instruction manual

Evoqua DEPOLOX Pool E Instruction Manual

Wallace & tiernan flow cell module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
WALLACE & TIERNAN
FLOW CELL MODULE
DEPOLOX POOL E
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DEPOLOX Pool E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Evoqua DEPOLOX Pool E

Summary of Contents for Evoqua DEPOLOX Pool E

  • Page 1 ® WALLACE & TIERNAN FLOW CELL MODULE DEPOLOX POOL E INSTRUCTION MANUAL...
  • Page 2 Flow cell module DEPOLOX Pool E Please note Original instruction manual! Simone WT.050.810.020.DE.IM.0115...

  • Page 3: Table Of Contents

    Flow cell module DEPOLOX Pool E Contents Contents Introduction Documentation Disclaimer Conventions Safety Intended use General safety instructions Specific operating phases Notes on Special Dangers Warranty conditions Description General Versions Design Function Technical data Installation Scope of delivery Transport and storage...
  • Page 4 Flow cell module DEPOLOX Pool E Contents Maintenance Maintenance intervals Maintenance parts kit Checking for leakages Checking the electrode cleaning sand Replacing the electrode cleaning sand Cleaning the fine filer Cleaning the flow rate monitor and non-return ball valve Cleaning...

  • Page 5: Introduction

    DEPOLOX Pool E. Observing these instructions will help prevent risks, reduce repair costs and downtimes, and increases the reliability and service life of the flow cell module DEPOLOX Pool E. Sections installation and maintenance are intended only for trained service personnel. These sections contain important...

  • Page 6: Disclaimer

    We are not liable for buyer damages (in particular, lost profits, lost information and service interruptions), which arise when using the flow cell module DEPOLOX Pool E, nor for other damages. You are solely responsible for the installation! The contents of the instruction manual has been checked to make sure that it matches the detailed hardware and software.

  • Page 7: Conventions

    Flow cell module DEPOLOX Pool E Introduction Conventions Please note This instruction manual contains a number of notes with different priorities that are marked with symbols. Pictogram Note Meaning Danger! Immediate danger to life and limb! If the situation is not corrected, death or serious injury will result.
  • Page 8 Flow cell module DEPOLOX Pool E Introduction WT.050.810.020.DE.IM.0115...

  • Page 9: Safety

    The operational safety of the flow cell module DEPOLOX Pool E is only guaranteed if it is used in accordance with its intended application. It may only be used for the purpose defined in the order and under the installation, operating and ambient conditions specified in this instruction manual.

  • Page 10: General Safety Instructions

    “Authorized specialists” refers to skilled personnel employed by the owner/operator or by Evoqua Water Technologies GmbH or, if applicable, the service partner. Only qualified electricians must perform work on electrical components.

  • Page 11: Specific Operating Phases

    Flow cell module DEPOLOX Pool E Safety IT security Evoqua Water Technologies GmbH offers IT security mechanisms for its products to support secure system operation. We recommend checking on a regular basis to see what information is available regarding IT security developments for your products.

  • Page 12: Notes On Special Dangers

    Flow cell module DEPOLOX Pool E Safety Notes on Special Dangers Electrical power Only qualified electricians or trained personnel supervised by a qualified electrician are permitted to perform any work on electrical components in accordance with valid electro-technical regulations. If stipulated, disconnect all parts of the flow cell module from the power supply before performing any inspection, maintenance or repair work.

  • Page 13: Description

    Description 3. Description General The flow cell module DEPOLOX Pool E is part of the pool management system DEPOLOX Pool E 700 P. The flow cell module DEPOLOX Pool E and sensors, together with the electronic module 700 P is used to measure and control the...
  • Page 14 DEPOLOX Pool E. The maintenance-free flow control valve is the main hydraulic part of the flow cell module DEPOLOX Pool E. The task of the flow control valve is to keep the sample water flow constant, irrespective of fluctuations in operating pressures.

  • Page 15: Versions

    Flow cell module DEPOLOX Pool E Description Versions The flow cell module DEPOLOX Pool E is configured in the factory according to the customer's specific requirements, with the electronic module 700 P according to the variant code. The scope of delivery differs in the version of the flow cell module DEPOLOX Pool E, the sensors, electronic components and accessories.
  • Page 16 Flow cell module DEPOLOX Pool E Description Configuration options DEPOLOX POOL E DEPOLOX POOL E Description Non-pressurized version pressurized version F E D A Chlorine sensor (free chlorine) B Total chlorine membrane sensor C LED glow stick D Redox single-rod measuring chain...

  • Page 17: Design

    Flow cell module DEPOLOX Pool E Description Design The flow cell module DEPOLOX Pool E essentially consists of (from the sample water inlet to the sample water outlet): • Sample water inlet (H) with ball valve (I) • Fine filter (J) •...

  • Page 18: Function

    Flow cell module DEPOLOX Pool E Description Function 3.4.1 General The sample water is connected on the input side via the G1/2” connection to the ball valve. The input pressure must be around 0.25 to 4.0 bar. To guarantee a constant flow, the minimum input pressure must not be less than 0.25 bar.
  • Page 19 Flow cell module DEPOLOX Pool E Description Two calibration holding clips are attached in the cover of the flow cell module. The calibration holding clips are pushed through the side of the basic housing of the flow cell module, thereby enabling the “hand-free”...
  • Page 20 Flow cell module DEPOLOX Pool E Description 3.4.2 Electronic box DFMe The electronic box DFMe consists of a spray-proof housing with built-in sensor electronics. The base plate of the electronic box DFMe includes the sensor input for the chlorine sensor and the evaluation electronics for the multi-sensor for the temperature measurement and flow rate monitoring.
  • Page 21 Modul SiDiSens LF (conductivity) To measure the conductivity, an additional module SiDiSens LF is installed in the flow cell module DEPOLOX Pool E. If this is not already done at the factory, it can be retrofitted (see „retrofit kits” on page 55).

  • Page 22: Technical Data

    Flow cell module DEPOLOX Pool E Description Technical data 3.5.1 Flow cell module DEPOLOX Pool E Housing Dimensions (WxHxD) 253 x 375 x 163 mm Weight approx. 2.5 kg Connections Non-pressurized Inlet: version G 1/2” A thread connection Outlet: Connecting nipple for hoses...
  • Page 23 Flow cell module DEPOLOX Pool E Description 3.5.2 Electronic box DFMe Version Sensor electronics integrated in the flow cell module for connection of: • Chlorine sensor • Multi-sensor 2 slots for sensor modules: • • Redox Power supply 24 V DC...
  • Page 24 Flow cell module DEPOLOX Pool E Description 3.5.3 Modul SiDiSens LF (conductivity) Version Sensor electronics integrated in the flow cell module for connection of the conductivity sensor: Connection 5-pole M12 socket for CAN interface extension CAN connection cable with 5-pole...
  • Page 25 Flow cell module DEPOLOX Pool E Description 3.5.4 Sensors Chlorine sensor (free chlorine in platinum version) Version Amperometric 3-electrode sensor with platinum electrodes, salt reserve, zirconium dioxide diaphragm, polymerized solid electrolyte, Ag/AgCl drain system Measurement range 0 to 50 mg/l Cl Working temperature -10 to +135°C (14 to 275°F)
  • Page 26 Flow cell module DEPOLOX Pool E Description pH single-rod measuring chain Version Single-rod measuring chain with universal membrane glass, salt reserve, zirconium dioxide diaphragm, polymerized solid electrolyte, Ag/AgCl drain system Measurement range pH 0 to 12 (temporarily to pH 14) Working temperature -5 to +80°C (23 to 176°F)
  • Page 27 Flow cell module DEPOLOX Pool E Description Redox single-rod measuring Version Single-rod measuring chain with chain gold electrode, salt reserve, (gold version) zirconium dioxide diaphragm, polymerized solid electrolyte, Ag/ AgCl drain system Measurement range ±2000 mV Working temperature -10 to +135°C (14 to 275°F)
  • Page 28 Flow cell module DEPOLOX Pool E Description Total chlorine membrane sensor Version Membrane-covered, amperometric (= free chlorine + combined 3-electrode sensor with integrated chlorine) temperature compensation, digital interface (CAN bus) Measurement range 0 to 20 mg/l Cl Working temperature +5 to +45°C (23 to 113°F)

  • Page 29: Installation

    Flow cell module DEPOLOX Pool E Installation 4. Installation Scope of delivery Please note The flow cell module DEPOLOX Pool E is configured in the factory according to the customersspecificrequirements,withtheElectronicmodule700 Pac cordingtothevariantcode.Thescopeofdeliverydiffersintheversionoft heFlowcellmoduleDEPOLOXPoolE,thesensors,electroniccompon entsandaccessories. The variant code is printed on the type plate and on the packaging sticker.

  • Page 30: Transport And Storage

    Flow cell module DEPOLOX Pool E Installation Transport and storage Transport The pool management system DEPOLOX Pool E 700 P is shipped in standard packaging. During transport, the packaged system must be handled carefully and should not be exposed to wet weather or moisture.

  • Page 31: Mechanical Installation

    Risk of injury or damage to the installation! Electrical work on the electronic module 700 P and flow cell module DEPOLOX Pool E may only be performed by authorized and qualified electricians. Modifications to the device other than those described in this instruction manual are not permitted.
  • Page 32 Please note Leave a clearance of at least 250 mm above the pool management system DEPOLOX Pool E 700 P for working with the electrodes. Proceed as follows, see dimension drawing on the next page: 1 Secure the top-hat rail to a solid wall using the supplied dowels and screws.
  • Page 33 Flow cell module DEPOLOX Pool E Installation Dimension drawing...
  • Page 34 3 Fasten the electronic module to the solid wall at the bottom by the holders using dowels and screws. 4 Hook the flow cell module DEPOLOX Pool E onto the tallow- drop screws. 5 Fasten the flow cell module to the solid wall at the bottom by the holders using dowels and screws.
  • Page 35 Flow cell module DEPOLOX Pool E Installation 4.3.1 Connecting the sample water Connecting the sample water A distinction must be made between a sample water inlet with inlet hose connection and rigid pipes. To connect the sample water inlet, note the following: Please note Never use copper tubing in the sample water lines.
  • Page 36 Flow cell module DEPOLOX Pool E Installation With hose connection For a sample water inlet with hose connection, proceed as follows: Please note The water-tightness of the hose screw connection is only guaranteed if the following installation instructions are followed! 1 Insert the hose (B) until it hits the hose bushing (D).
  • Page 37 Flow cell module DEPOLOX Pool E Installation Connecting the sample water With the sample water outlet, a distinction must be made between outlet the non-pressurized and pressurized version. Non-pressurized version For the sample water outlet of the non-pressurized version, proceed as follows: Please note Never use copper tubing in the sample water lines.
  • Page 38 Flow cell module DEPOLOX Pool E Installation Examples for sample water extraction using a booster pump Example 1 WT.050.810.020.DE.IM.0115...
  • Page 39 Flow cell module DEPOLOX Pool E Installation Example 2...
  • Page 40 Flow cell module DEPOLOX Pool E Installation Parts list Sample water extraction for fresh water (part no. W3T158528) Sample water extraction for salt water (part no. W3T158529)) Item Part No. Description Quantity W2T505181 Screw joint W2T505182 Screw joint W3T171416 Strainer complete...
  • Page 41 Flow cell module DEPOLOX Pool E Installation 4.3.2 Installing sensors Please note Please follow the relevant instructions for the sensors! Please note For the pressurized version, do not place a total chlorine membrane sensor into the cell body. Proceed as follows: 1 Remove the plug from the mount hole on the cover of the cell body.
  • Page 42 Flow cell module DEPOLOX Pool E Installation 6 Depending on the design of the sensor, either plug or screw the sensor cable in place. Please note With the pressurized version, the sensors must be screwed in or secured to prevent them from being pushed out.
  • Page 43 Flow cell module DEPOLOX Pool E Installation 4.3.4 Inserting the fine filter Please note A fine filter must only be installed when a total chlorine membrane sensor is employed. Proceed as follows to insert the fine filter: 1 Remove the housing cover of the flow cell module DEPOLOX Pool E.
  • Page 44 Please note A distinction must be made between the non-pressurized and pressurized version of the flow cell module DEPOLOX Pool E. Non-pressurized version With the non-pressurized version, the electrode cleaning sand can also be added in a simplified form over the mount hole of a sensor in the cell cover.
  • Page 45 Flow cell module DEPOLOX Pool E Installation Pressurized version Proceed as follows: 1 Close the ball valve (G) at the sample water inlet and sample water outlet (D). 2 Open the drain screw on the drain (F) and empty the cell body.

  • Page 46: First Commissioning

    Flow cell module DEPOLOX Pool E Installation 4.3.6 Installing calibration aids Two calibration clips are installed in the housing cover. These clips can be inserted into the rear panel of the housing. The clip with the plastic inserts for the sensor is pushed into the top catch (A).

  • Page 47: Shut-Down

    Flow cell module DEPOLOX Pool E Installation Shut-down Attention! If the installation site of the flow cell module DEPOLOX Pool E is not frost-free, the system must be taken out of operation in good time! See instruction manual “Electronic module 700 P” and the corr- esponding instructions for the sensors.

  • Page 48: Renewed Start Up

    Flow cell module DEPOLOX Pool E Installation 4.5.2 Shutting down the sensors Please note Please follow the relevant instructions for the sensors! For the chlorine sensor and pH or Redox single-rod measuring chain, proceed as follows: 1 Pull out or unscrew the sensors.

  • Page 49: Maintenance

    Flow cell module DEPOLOX Pool E Maintenance 5. Maintenance Maintenance intervals Please note Liability for defects can only be accepted if maintenance work is performed as specified. Adhere to the applicable standards and national and regional regulations. Activity Period/Interval Check for leakages daily Chapter 5.3...

  • Page 50: Maintenance Parts Kit

    Flow cell module DEPOLOX Pool E Maintenance Maintenance parts kit Non-pressurized version Part No. Description W3T166181 Maintenance parts kit, annual maintenance W3T170073 Maintenance parts kit, 4 years W3T158882 Spare parts set for flow control valve Pressurized version Part No. Description...

  • Page 51: Checking For Leakages

    Flow cell module DEPOLOX Pool E Maintenance Checking for leakages Check the entire measuring device every day, including all screw connections, for leakage. Repair any leakage points immediately! Please note Ascending air bubbles in the cell body influence the measuring accuracy.

  • Page 52: Cleaning The Fine Filer

    Flow cell module DEPOLOX Pool E Maintenance Cleaning the fine filer Please note A fine filter must only be installed when membrane sensors are employed. The fine filter must be cleaned to prevent any gradual blockage. See also chapter 4.3.4 Inserting the fine filter.

  • Page 53: Cleaning The Flow Rate Monitor And Non-Return Ball Valve

    Flow cell module DEPOLOX Pool E Maintenance Cleaning the flow rate monitor and non-return ball valve 1 Dismantle the filter unit (see image in Chapter 5.6 Cleaning the fine filer). To do this, loosen both knurled nuts and remove the filter unit.
  • Page 54 Flow cell module DEPOLOX Pool E Maintenance WT.050.810.020.DE.IM.0115...

  • Page 55: Retrofit Kits And Spare Parts

    Flow cell module DEPOLOX Pool E Retrofit kits and spare parts 6. Retrofit kits and spare parts Retrofit kits Sensor measuring modules The flow cell module DEPOLOX Pool E gives the option to retrofit sensor measuring modules. Part No. Description W3T320090...

  • Page 56: Retrofitting Sensor Measuring Modules

    See also following image CAN connection. 4 Unhook the electronic box DFMe from the mounting hook (G) of the flow cell module DEPOLOX Pool E and loosen the four cover screws of the electronic box. 5 Open the housing of the electronic box.
  • Page 57 Retrofit kits and spare parts 9 Hook the electronic box DFMe by the mounting hook (G) back onto the flow cell module DEPOLOX Pool E and secure on the bottom using the securing screws. See also following image CAN connection.

  • Page 58: Spare Parts

    Flow cell module DEPOLOX Pool E Retrofit kits and spare parts Spare parts Please note For reasons of safety, only use original spare parts. Please contact our customer service if you need any spare parts. 6.1.1 Flow cell module DEPOLOX Pool E Part No.
  • Page 59 Flow cell module DEPOLOX Pool E Retrofit kits and spare parts 6.1.2 Sensors Chlorine sensor Part No. Description W3T160652 Chlorine sensor (free chlorine in platinum version) W3T160991 Chlorine sensor (free chlorine in gold version) W3T271602 Sensor cable for chlorine sensor...
  • Page 60 Flow cell module DEPOLOX Pool E Retrofit kits and spare parts Redox single-rod measuring Part No. Description chain W3T169298 Redox single-rod measuring chain (platinum version) W3T172356 Redox single-rod measuring chain (gold version) W3T320082 Plug-in card with sensor cable for Redox single-...
  • Page 61 Flow cell module DEPOLOX Pool E Retrofit kits and spare parts 6.1.3 LED glow stick Part No. Description W3T277062 LED glow stick 6.1.4 CAN bus extension cable Part No. Description W2T504979 CAN bus extension cable 0.3 m W2T504980 CAN bus extension cable 1.0 m W2T504981 CAN bus extension cable 2.0 m...
  • Page 62 Flow cell module DEPOLOX Pool E Retrofit kits and spare parts WT.050.810.020.DE.IM.0115...

  • Page 63: Drawings

    Flow cell module DEPOLOX Pool E Drawings 7. Drawings Flow cell module DEPOLOX Pool E non-pressurized version...
  • Page 64 Flow cell module DEPOLOX Pool E Drawings Parts list Flow cell module DEPOLOX Pool E non-pressurized version Item Part No. Description Item Part No. Description W3T247776 Basic housing W3T172997 O-ring W2T507548 Type plate W3T164597 O-ring W3T247777 Housing cover W3T158575 Drain screw...

  • Page 65: Flow Cell Module Depolox Pool E Pressurized Version

    Flow cell module DEPOLOX Pool E Drawings Flow cell module DEPOLOX Pool E pressurized version...
  • Page 66 Flow cell module DEPOLOX Pool E Drawings Parts list Flow cell module DEPOLOX Pool E pressurized version Item Part No. Description Item Part No. Description W3T247776 Basic housing W3T172997 O-ring W2T507548 Type plate W3T164597 O-ring W3T247777 Housing cover W3T158575 Drain screw...

  • Page 67: Electronic Box Dfme

    Flow cell module DEPOLOX Pool E Drawings Electronic box DFMe...
  • Page 68 Flow cell module DEPOLOX Pool E Drawings Parts list Electronic box DFMe Item Part No. Description W3T262803 Basic housing DFMe W3T256343 Housing cover DFMe W2T807967 Plastic self-tapping screw A2 W3T256342 PCB assembled CAN board DES-DP5e W2T504397 Plastic self-tapping screw d4x10...

  • Page 69: Certificates

    Flow cell module DEPOLOX Pool E Certificates 8. Certificates...
  • Page 70 Flow cell module DEPOLOX Pool E Certificates WT.050.810.020.DE.IM.0115...

  • Page 71: Index

    Flow cell module DEPOLOX Pool E Index 9. Index Brine water 19 Electronic box DFMe 20 Description 20 Function 19 General 14 Calibration aids Plugging in sensors 42 Installation 46 Calibration holding clip Function 19 Installation 46 Filter unit Cell body...
  • Page 72 Flow cell module DEPOLOX Pool E Index Sample water outlet LED glow stick Non-pressurized version 37 Function 19 Pressurized version 37 Scope of delivery 29 Sensor measuring modules Retrofitting 56 Maintenance 49 Sensors Maintenance intervals 49 Installing 41 Maintenance parts kit 50...
  • Page 73 Flow cell module DEPOLOX Pool E ® Wallace & Tiernan products worldwide Australia Bahrain Germany +61 3 8720 6597 +973 39 78 66 54 +49 8221 9040 info.au@evoqua.com wtbah@evoqua.com wtger@evoqua.com France Canada +33 1 41 15 92 20 +44 1732 771777 +1 905 944 2800 wtfra@evoqua.com...
  • Page 74 All information presented herein is believed reliable and in accordance with accepted engineering practices. Evoqua makes no warranties as to the completeness of this information. Users are responsible for evaluating individual product suitability for specific applications. Evoqua assumes no liability whatsoever for any special, indirect or consequential damages arising from the sale, resale or misuse of its products.

Table of Contents