Honda Accord 2012 Owner's Manual page 394

Main Menu Table of Contents
WING BOLT
For compact
spare tire
SPACER CONE
16. Place the flat tire face down in the
spare tire well.
17. Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
For normal
tire
To remove the spacer cone, squeeze
the tabs on the wing bolt to
disengage it from the center of the
spacer cone, then pull the bolt
downward.
To install the wing bolt to the spacer
cone, reverse this procedure.
18. Secure the flat tire by screwing
the wing bolt back into its hole.
19. Store the jack and tools in the tool
SPACER CONE
kit case. Place the tool kit case in
the flat tire.
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
TAB
securely before driving.
20. Store the wheel cover or center
cap in the trunk. Make sure it does
not get scratched or damaged.
21. Lower the trunk floor, then close
the trunk lid.
22. Your vehicle's original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
Changing a Tire with TPMS
page
Changing a Flat Tire
(see
325 ).
389