Honda Accord 2012 Owner's Manual page 368

Main Menu Table of Contents
6. Turn on the lights to make sure
the new bulb is working.
7. Push the trunk lid trim back into
position.
8. Put the fastener into the hole on
the side of the trunk lining.
Reinstall the screw.
Replacing a High-mount Brake
Light Bulb
SOCKET
1. Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
3. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
BULB
Lights
363