Volvo V60 TWIN ENGINE 2019 Owner's Manual page 412

HYBRID INFORMATION
||
Monitoring at the plug
If the temperature at the power source to which
the charging cable is connected is too high, the
charging current is reduced. If the temperature
exceeds a critical level, charging is stopped com-
pletely.
IMPORTANT
If the temperature monitoring has automati-
cally lowered the charging current repeatedly
and charging has been interrupted then the
cause of the overheating must be investiga-
ted and rectified.
Related information
Charging cable (p. 407)
•
The voltage in the socket may vary depending on market.
4
410
Opening and closing the hatch for
the charging input socket
The flap for the hybrid battery's charging input
socket is opened manually.
Press in the rear section of the cover and
release.
Open the cover.
Close the cover for the charging input socket in
reverse order.
Related information
Start charging the hybrid battery (p. 410)
•
Stop charging of hybrid battery (p. 419)
•
Charging the hybrid battery (p. 405)
•
Start charging the hybrid battery
The car's hybrid battery is charged with a charg-
ing cable between the car and a 230 V socket
(alternating current).
Only use the charging cable supplied with the
car or a replacement cable recommended by
Volvo.
IMPORTANT
Never connect the charging cable when there
is a risk of thunderstorm or lightning strike.
NOTE
Volvo recommends a charging cable in
accordance with IEC 62196 and IEC 61851
which supports temperature monitoring.
4