WHEELS AND TYRES
||
IMPORTANT
Risk of overheating. The compressor must not
run for more than 10 minutes.
5. Inflate the tyre to the pressure specified on
the tyre pressure label on the driver side
door pillar. Release air using the pressure
reducing valve if the tyre pressure is too high.
6. Switch off the compressor. Detach the air
hose and the electrical cable.
7. Refit the dust cap on the tyre.
NOTE
After a tyre has been inflated, always refit
•
the dust cap in order to avoid damage to
the valve from gravel, dirt, etc.
Only use plastic dust caps. Metal dust
•
caps can rust and become difficult to
unscrew.
NOTE
The compressor is an electrical device. Follow
local regulations related to waste manage-
ment.
568
Related information
Recommended tyre pressure (p. 549)
•
Using a puncture repair kit (p. 564)
•
Emergency puncture repair kit (p. 563)
•