CARE AND CLEANING
If the condensed water container is full, the programme stops
automatically. The
must empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a horizontal position.
2. Pull the plastic connection out and drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in and place the water
container back into position.
4. To continue the programme press the Start/Pause button.
10.3 Cleaning the condenser
If the symbol
condenser and its compartment. If it is dirty, clean it. Do the check
not less than once a 6 months.
WARNING!
Do not touch the metal surface with bare hands. Risk of injury.
Wear protective gloves. Clean carefully to avoid damaging the
metal surface.
To inspect:
32/48
Tank symbol comes on the display and you
Condenser flashes on the display, inspect the