Table of Contents
Advertisement
66
Operating
AUTO POWER On/Off
This unit automatically turns on and off by an input
source : Optical.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the
input signal and selects the optical function. You
can hear the sound from your device.
This function turns on or off each time you press
AUTO POWER.
,
Note
y After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
3
(Optical).
y After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
y If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
y Depending on the connected device, this
function may not operate.
y If you want to use AUTO POWER, SIMPLINK
must be turned off. It takes for about 30
seconds to switch on or off SIMPLINK.
Sound adjustment
Adjust volume level
automatically
This unit supports Auto volume function that
automatically adjusts the volume level.
When the output sound is too loud or too low,
press AUTO VOL on the remote control. So you can
enjoy the sound with appropriate levels.
To cancel this function, press the button again
while "ON" is displayed.
Adjust the Treble/Bass/Sub-
woofer
You can adjust the sound level of Treble, Bass and
Subwoofer as your preference.
TREBLE/BASS : -5 dB to 5 dB
SUBWF (Subwoofer) : -20 dB to 6 dB
1. Press
button repeatedly to select TREBLE,
BASS or SUBWF (Subwoofer).
2. Press VOL o/p to adjust the sound level.
Night mode
Set Night mode to On to reduce the sound
intensity and improve fineness and softness.
Press
button on the remote control. So you can
activate Night mode. To cancel it, press
again.
button
Advertisement
Table of Contents
