Wireless Subwoofer Connection - LG MUSICflow LAS855M Owner's Manual

Wireless subwoofer
connection
LED indicator of wireless subwoofer
LED Color Status
Green The connection is trying.
(Blink)
Green The connection is completed.
Red The wireless subwoofer is
in standby mode or the
connection is failed.
Off (No The power cord of wireless
display) subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED or the blinking of green LED on
the wireless subwoofer and the subwoofer does
not make sound. To solve the problem, follow the
below steps.
1. Adjust volume level of the main unit to
minimum.
- "VOL MIN" appears on the display window.
2. Press and hold (Mute) on the remote control
for about 3 seconds.
- "WL RESET" appears on the display window
briefly.
3. If the LED of the wireless subwoofer already
blinks in green continually, you can skip this
step.
Press and hold PAIRING on the back of the
wireless subwoofer for more than 5 seconds.
- The LED of the wireless subwoofer lights up
alternately in red and green.
4. Disconnect the power cord of the main unit
and the wireless subwoofer.
5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned
off.
The main unit and the wireless subwoofer will
be paired automatically when you turn on the
main unit.
- When the connection is completed, you can
see the green LED on the subwoofer.
,
Note
y It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer
as close as possible and avoid the cases
below.
- There is a obstacle between the main
unit and the subwoofer.
- There is a device using same frequency
with this wireless connection such as a
medical equipment, a microwave or a
wireless LAN device.
Connecting 15
2