2-in-1 filter replacement alarm function
If the filter clean/replacement indicator blinks while using the air purifier, replace the 2-in-1
filter and hold the [
• Once the filter clean/replacement indicator blinks, it remains on until you press and hold the [
button for 3 seconds (until hearing a ringing sound) to reset the alarm .
NOTE
• If you replace the filter due to a strange odor before the filter clean/replacement indicator blink, press and hold
sec
the [
Button lock function
This function prevents the button being pressed by mistake or by children .
The [ ] button locks the buttons.
▶ The [ ] button locks the buttons with a ringing sound when it is pressed for 3 seconds or longer .
X
▶ When the button lock function is selected, none of the buttons work .
X
▶ To unlock the buttons, press and hold the [ ] button for 3 seconds or longer again . The buttons are unlocked with a
X
ringing sound .
sec
] button for 3 seconds or longer to reset the alarm.
sec
] button for 3 seconds (until hearing a ringing sound) to reset the alarm .
sec
ENGLISH-14
sec
]