Maintenance; Torques - BLIKIR RCP-2 G4 Installation Manual

Maintenance

1. When you notice signs of rust or peeling/removal of paint, it is essential to address the issue
promptly by removing the rust and repainting the affected areas.
2. Whenever aluminum components are connected to the steel structure, it is crucial to apply
separation, such as EPDM rubber, to prevent galvanic corrosion.
3. Regularly inspect the bolts and ensure they are properly secured at least once a year. Follow the
specified torque specs for tightening.
4. In the event that the columns of the structure are impacted, such as by a vehicle collision,
immediate replacement of the columns is necessary for safety and structural integrity.
WARNING: The RCP-2 Carport/Canopy structure is constructed with hot galvanized steel and coated
with a marine-grade protective layer. It's important to note that any drilling or cutting of the structure
will expose the raw steel, making it susceptible to corrosion and potentially compromising the strength
and integrity of the structure. Such actions will void the warranty and may even lead to the collapse of
the structure under certain conditions. Therefore, we strongly advise against any modifications that
could compromise the structure's durability and safety.

Torques

Horizontal Connections and Bolts Installation Guidelines
All horizontal connections within our system utilize sleeves, and the bolts are intended to
securely hold these sleeves in place. To ensure proper assembly, we recommend tightening
the bolts 1/4 to 1/3 turn beyond "snug tight" or torque to 21 ft-lbs.
Please follow this torque guideline unless otherwise specified by the manufacturer for
specific connections subject to vibration or with bolt tightness requirements.
For the installation of base plate anchors and Solar Racking L-Feet, adhere to the
manufacturer's specifications provided in their respective installation manuals.
Important Maintenance Note:
To maintain the integrity of your installation over time, we kindly request that you periodically
inspect and tighten the bolts and nuts. This maintenance check should be conducted
regularly, and particularly after any significant weather events such as storms or
earthquakes.
By performing these routine inspections and tightening, you help ensure the continued
stability and safety of your structure.
© BLIKIR.Inc, All rights reserved. BLIKIR and the BLIKIR logo are trademarks or registered trademarks of BLIKIR, Inc.
Date: 08G4/2023/V02/ENG. Subject to change without notice
RCP-2 G4 |
Solar Carport / Canopy
5