Table of Contents
Advertisement
2A. Connecting to a Computer
Connect the USB PhotoReader to the computer
(using without other peripheral devices)
Connect the USB PhotoReader to the USB port located at the back of the
computer. Make sure the cable ends are firmly connected.
Be careful not to confuse the upper and lower parts of the connector. Do not force
connections, as this may damage the computer or the card reader.
Note: The USB cable from the USB PhotoReader may be plugged into the
computer while the computer is running.
Under Windows 98 operating system, as soon as the USB PhotoReader is
connected, you will see a window displaying the message New Hardware
Found. Proceed to next section for instructions on software installation.
Page 6
Enlarged View
USB cable from the USB PhotoReader
Advertisement
Table of Contents
Need help?
Do you have a question about the STI-CFRDR/USB and is the answer not in the manual?
Questions and answers