Table of Contents
Advertisement
2.3. Software Installation for Apple
1. Connect the USB Card Reader to the USB port of the computer and start
the computer.
2. Open the Software Installation CD-ROM.
3. Double click Reader to install the USB device driver. You will see the
following display which warns you that the computer must be restarted
after installation. Click Yes to install the device driver.
4. After the installation is complete, the following message is displayed.
Click Restart to restart the computer. The installation is complete.
Now, you are ready to use the PhotoReader.
Page 26
Advertisement
Table of Contents
Need help?
Do you have a question about the STI-CFRDR/USB and is the answer not in the manual?