MTD 12AGB2JA004 Operator's Manual page 21

Problem
Uneven cut
Mower will not self propel
Cause
1. Wheels not positioned correctly.
2. Dull blade.
1. Belt not installed properly.
2. Debris clogging drive operation.
3. Damaged or worn belt.
Remedy
1. Place front and rear wheels in same height
position.
2. Sharpen or replace blade.
1. Check belt for proper pulley installation and
movement.
2. Stop engine, disconnect spark plug boot,
and clean out debris.
3. Inspect and replace belt.
S 9 — t
ection roubleShooting
21