Sima STP-85A User Manual

85 watt dc to ac 170-watt high surge power inverter

Advertisement

Quick Links

85 WATT DC to AC
170-Watt High Surge
Power Inverter
Model STP-85A
www.simaproducts.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STP-85A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sima STP-85A

  • Page 1 85 WATT DC to AC 170-Watt High Surge Power Inverter Model STP-85A www.simaproducts.com...
  • Page 2 Safety Precautions & Warnings Page 2 • Never operate the inverter from any power source other than a 12 volt DC battery. • The inverter is designed to be connected to the cigarette lighter socket with the 12 volt power plug. Do not modify the power plug.
  • Page 3 Repeated excessive power draw can cause failure of the power inverter Sima Products Corporation 140 Pennsylvania Avenue Bldg. #5 Oakmont, PA 15139 800-345-7462 www.simaproducts.com Page 3...
  • Page 4 2. The LED Indicator light should glow RED confirming that there is power running to the inverter. 3. Plug the appliance into one of the AC receptacle on the rear panel of the inverter. Cigarette Page 4...
  • Page 5 Inverter Protection Features. The RED LED Indicator light will turn on and the inverter will turn itself off automatically when: 1. The power input from the battery exceeds 15 volt. 2. The power input from the battery is less than 15 volt.
  • Page 6 Using the airplane adapter To use the airplane adapter, plug the STP-85A securely into the female socket of the airplane adapter (A). Plug the airplane connector (B) into the socket of the airplane seat and operate the inverter normally. SPECIFICATIONS: Max.
  • Page 7: Limited Warranty

    Oakmont, PA 15139 412-828-3700 412-828-3775 FAX It is recommended that you call Sima at the number listed above to obtain a return authorization number. Limitation of Liability and Remedies Sima shall have no liability for any damages due to lost profits, loss of use or...
  • Page 8: Troubleshooting

    Solution: Attach to proper supply Problem Unit operates for a while and gets warm Solution: Allow inverter to cool down. Turn inverter off and back on to reset. Page 8 Possible Cause Input voltage is below 10 volts Possible Cause...

Table of Contents