Install Arcsoft Programs And Camera Drivers In Windows 98Se/Me/2000/Xp; Install Camera Drivers; Making Camera To Pc Connection; Downloading Images - C*Pix SDC2000 User Manual

2. Select number 1 on the setup screen to install the Arcsoft software
3. Change Destination Folder if necessary
4. Select components to install
5. Change program folder name if necessary
6. Click Finish button to complete Setup

Install camera drivers:

1. Select number 2 on the setup screen to install the camera drivers.
2. Click Finish button to complete Setup and restart your computer
3. After your computer is restarted, connect to the camera and computer with the USB cable. The
computer will recognize the camera.
Note:
• NOTE: If you are running Windows 98 First Edition, Select number 3. Download DirectX 8.0 on
the Installation CD setup screen to download a copy of DirectX 8.0 from Windows website
for use with your camera. You must be connected to the internet to access this link.
• The installed camera drivers may conflict other USB devices in your computer system.
Connecting the Camera to Your PC
Important: Do not connect camera to PC before drivers are installed.
1. Take some images with your digital camera
2. Plug the enclosed USB cable into the camera's USB port and then into your computer's USB
port.

Downloading Images

Downloading photos using PhotoStudio

NOTE: The graphics shown are based on the user interface in Windows 98SE
1. Click Start > Programs> SDC2000 Digital Camera Suite > PhotoStudio 2000 to open the Arcsoft
PhotoStudio program
2. Click File > Select Source from the pull-down menu and select "My DSC"
3. Click File > Acquire from the pull-down menu to open the following dialog panel. Click Download
photos icon.
7