Table of Contents
Advertisement
4. Click File > Set Capture File from the pull-down menu
5. Enter the filename for the video to be captured and click Open button. Make sure to enter avi as
the file extension
6. Keep the default value of 1 MBytes in the Capture file size field and click OK button.
7. Click Capture > Start Capture from the pull-down menu
8. Select OK button to start video capture
9. The time elapsed of the video capture is shown at the bottom of the screen
10. When video capture is finished, click Capture > Stop Capture from the pull-down menu or press
Esc key on the keyboard
NOTE: If you cannot record any videos, try re-installing the camera driver by double-clicking Setup.exe
icon inside Drivers folder at the root level of the supplied Installation CD, and record again.
11
Advertisement
Table of Contents
