Changing Capture Modes
Continuous Mode
1. Press Mode button until
2. Hold down the Shutter button to take images continuously until the frame count goes down to 00.
NOTE: In Continuous mode, 6 images will be taken in one second.
Self-Timer
1. Press Mode button until
2. Press Shutter button. A beep will sound and the LED will blink for 10 seconds before a photo is
taken.
Deleting Images
Deleting All Images
1. Press Mode button until
2. Press Shutter button and
button again. You will hear a beep and all images will be cleared.
NOTE: If Shutter button is not pressed while
LCD panel in 5 seconds.
Deleting Last Image Taken
1. Press Mode button until
2. Press Shutter button and the last taken photo will be deleted
Connecting digital camera to PC
Install Arcsoft programs and camera drivers in Windows 98SE/Me/2000/XP
NOTE: The graphics shown are based on the user interface in Windows 98SE
•
NOTE: If you are running Windows 98 First Edition, Select number 3. Download DirectX 8.0 on
the Installation CD setup screen to download a copy of DirectX 8.0 from Windows website
for use with your camera. You must be connected to the internet to access this link.
1. Place the Installation CD into the CD-ROM drive, The CD-ROM will autorun.
is shown on the LCD panel
appears on the LCD panel
is shown in the LCD panel.
will flash in the LCD panel. While
is shown on the LCD panel
6
is blinking, press Shutter
is blinking, the frame count will return on the