Table of Contents
Advertisement
Before using your appliance
for the first time
Preliminary
cleaning
Initial burn-in
Subsequent cleaning
Time of day
Setting the time
Take the accessories out of the oven.
Remove all packaging remnants, e.g. polystyrene
parts, from the oven.
1.
Clean the appliance exterior with a soft
moistened cloth.
2.
Remove the shelf supports from the oven.
3.
Clean the oven and the accessories with a hot
detergent solution.
Please observe the operating instructions
furnished with the hob.
Before using the appliance for the first time, you
must set the time on the electronic clock.
Heat the empty oven for approx. 30 minutes.
Select circotherm
Clean the oven with a hot detergent solution.
Install the shelf supports.
After connecting to the mains, or after a power
failure, the display
Press the
button and set the current time with
>
the rotary knob (e.g.
To correct the time, press the
symbol flashes.
Then set the time.
Note: The time cannot be corrected if an automatic
function has been set (see Electronic clock for
cancelling automatic function).
*
at a setting of 190° C.
0:00
will blink.
15:00
hours).
>
button until the
9
Advertisement
Table of Contents
