Power (Rap); Shifting Into Park; Shifting Out Of Park - Cadillac CRC 2021 Manual

Table of Contents

Advertisement

Cadillac XT4 Owner Manual (GMNA-Localizing-MidEast-14584650) - 2021 -
CRC - 7/15/20
The length of time the heater should
remain plugged in depends on several
factors. Ask a dealer in the area where
you will be parking the vehicle for the
best advice on this.
Retained Accessory

Power (RAP)

When the ignition is turned from on
to off, the following features (if
equipped) will continue to function
for up to 10 minutes, or until the
driver door is opened. These features
will also work when the ignition is in
RUN or ACC/ACCESSORY:
Infotainment System
Power Windows (during RAP this
functionality will be lost when any
door is opened)
Sunroof (during RAP this
functionality will be lost when any
door is opened)
Auxiliary Power Outlet
Audio System
OnStar System

Shifting Into Park

To shift into P (Park):
1. Hold the brake pedal down and set
the parking brake. See Electric
Parking Brake 0 220.
2. Press the button on top of the shift
lever to shift into P (Park). See
Automatic Transmission 0 213.
3. The P indicator on the shift lever
will turn red when the vehicle is in
P (Park).
Leaving the Vehicle with the
Engine Running
Warning
It can be dangerous to leave the
vehicle with the engine running.
It could overheat and catch fire.
It is dangerous to get out of the
vehicle if the vehicle is not in
P (Park) with the parking brake
firmly set. The vehicle can roll.
Do not leave the vehicle when the
engine is running. If you have left
the engine running, the vehicle can
move suddenly. You or others could
be injured. To be sure the vehicle
will not move, even when you are
DRIVING AND OPERATING
Warning (Continued)
on fairly level ground, always set
the parking brake and shift to
P (Park).
If you have to leave the vehicle with
the engine running, be sure the
vehicle is in P (Park) and the parking
brake is set before you leave it.

Shifting out of Park

This vehicle is equipped with an
electronic transmission. The shift lock
release button is designed to prevent
inadvertent shifting out of P (Park).
To shift out of P (Park):
1. Ensure the engine is running.
2. Apply the brake pedal.
3. Press and hold the shift lock
release button.
4. Move the shift lever to the desired
position.
5. The P indicator will turn white and
the gear indicator on the shift lever
will turn red when the vehicle is no
longer in P (Park).
211

Advertisement

Table of Contents
loading

Table of Contents