Exterior Lamp Controls - Cadillac CRC 2021 Manual

Cadillac XT4 Owner Manual (GMNA-Localizing-MidEast-14584650) - 2021 -
CRC - 7/15/20
Lighting
Exterior Lighting
Exterior Lamp Controls . . . . . . . . . . 127
Exterior Lamps Off Reminder . . . 128
Headlamp High/Low-Beam
Changer . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . 129
Daytime Running
Lamps (DRL) . . . . . . . . . . . . . . . . . . . . 129
Automatic Headlamp System . . . 129
Hazard Warning Flashers . . . . . . . . 130
Turn and Lane-Change
Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Cornering Lamps . . . . . . . . . . . . . . . . . 130
Interior Lighting
Instrument Panel Illumination
Control . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Courtesy Lamps . . . . . . . . . . . . . . . . . . 131
Dome Lamps . . . . . . . . . . . . . . . . . . . . . 131
Reading Lamps . . . . . . . . . . . . . . . . . . . 131
Lighting Features
Entry Lighting . . . . . . . . . . . . . . . . . . . . 132
Exit Lighting . . . . . . . . . . . . . . . . . . . . . . 132
Battery Power Protection . . . . . . . . 132
Exterior Lighting Battery
Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Exterior Lighting

Exterior Lamp Controls

The exterior lamp control is on the
turn signal lever.
Turn the control to the following
positions:
: Turns off the exterior lamps. The
knob returns to the AUTO position
after it is released. Turn to again to
reactivate the AUTO mode.
AUTO : Automatically turns the
exterior lamps on and off, depending
on outside lighting.
: Turns on the parking lamps
including all lamps, except the
headlamps.
LIGHTING
: Turns on the headlamps together
with the parking lamps and
instrument panel lights.
IntelliBeam System
If equipped, this system turns the
vehicle's high-beam headlamps on and
off according to surrounding traffic
conditions.
The system turns the high-beam
headlamps on when it is dark enough
and there is no other traffic present.
This light comes on in the
instrument cluster when the
IntelliBeam system is enabled.
Turning On and Enabling IntelliBeam
127