Download Print this page

Atmor Platinum Digital Assembly Instructions Manual

Hide thumbs Also See for Platinum Digital:

Advertisement

Quick Links

Platinum Digital
Assembly Instructions
Step 1
Step 2
Open the cover and release the 2
digital display quick connectors


Advertisement

loading

Summary of Contents for Atmor Platinum Digital

  • Page 1 Platinum Digital Assembly Instructions Step 1 Step 2 Open the cover and release the 2 digital display quick connectors...
  • Page 2 Platinum Digital Assembly Instructions Step 3 Open the entrance cable in the back of the unit. Be sure to open the side of the cable Step 4 Find the optimal place for all users and stick the drilling hole template to the wall.
  • Page 3 Platinum Digital Assembly Instructions Step 5 Hang the unit on the wall by 4 screws Step 6 Connect a reinforced hose to the inlet on the left side of the unit. (Don't forget to insert rubbers). Be sure to close it well - No need...
  • Page 4 Platinum Digital Assembly Instructions Step 7 Connect the second end of inlet reinforced hose to the water supply (don't forget to insert the rubbers). Step 8 Connect the outlet hose to the outlet water connector. (on the right side). and the Shower hand to the second end.
  • Page 5 Platinum Digital Assembly Instructions Step 9 1. Insert the Soap dishes. 2. Insert the hand shower holder. 3. Place the ends of the sliding bar. 4. Place the sliding bar on the wall on right height. (Comfortable height for all the users in the house) 5.
  • Page 6 Platinum Digital Assembly Instructions Step 11 Connect the sliding bar to the wall using 4 screws Step 12 Connect the cover of the Sliding bar ends.
  • Page 7 Platinum Digital Assembly Instructions Step 13 Hang the shower hand on the sliding bar holder. Step 14 Open the water supply and the temperature knob (the left knob) and check for leakage. If there is no leakage - Go on...
  • Page 8 Platinum Digital Assembly Instructions Step 15 Insert the Electric cable threw the holes on the back of the unit. Step 16 Connect the electric cable to the Terminal block. L M N...
  • Page 9 Platinum Digital Assembly Instructions Step 17 Connect the 2 quick connectors of the Digital display. Step 18 Round the Knobs according to the Facet and Rotering switch Pivot. Than put the cover of the unit Be careful on the digital display...
  • Page 10 Platinum Digital Assembly Instructions Step 19 Close the cover by 4 short screws...
  • Page 11 Platinum Digital Assembly Instructions Step 20 Final view...