Vornado Breesi - Medium Nursery Air Circulator Manual

IMPORTANT INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING.
Please visually inspect all internal and external components before connecting to electric current. If any damage is found, DO NOT USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.

This appliance has a polarized plug. (One blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

To reduce the risk of fire or electrical shock, do not use this product with any solid state speed control device. To reduce the risk of fire or electric shock and injury to persons, do not use in a window.

This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this circulator.
• Do use common sense when using this product and/or any electrical appliance.
• Do unplug your circulator before cleaning.
• Do clean your Vornado Air Circulator regularly. Refer to the CLEANING instructions provided. Never clean the air circulator in any manner other than as instructed in this manual.
• Do Not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning.
• Do Not immerse this product in water or allow water to drip into the motor housing.
• Do Not use near furnaces, fireplaces, stoves or other hightemperature heat sources.
• Always unplug when not in use or when leaving the dwelling or premises for extended periods of time.
• Do Not carry this product by the cord, or use the cord as a handle.
• Do Not operate any circulator with a damaged cord or plug or after the circulator malfunctions, has been dropped or damaged in any manner. Discard circulator, or return to authorized service facility for examination and/or repair.
• Do Not attempt to repair or replace parts.
• Do Not use outdoors.
• Do Not use this product on wet surfaces.
• Do Not use this product in a bathtub or shower.
• Do Not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect circulator, turn controls to off, then remove plug from outlet.
• Do Not position this product too close to draperies because they may be drawn into the rear grill, cutting off airflow.
• 
  Use this circulator only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Operate this circulator only in its upright position.
• Do Not use this circulator on a circuit that has a variable speed device operating, such as a blender or a variable speed fan.

User Servicing Instructions

Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. Open fuse cover (A.) by sliding access cover on top of attachment plug towards blades. Remove fuse carefully (B.) by gently prying out the ends of the fuse from the receptacle.

Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. Contact Vornado customer service for replacement fuse.
Phone: 1-800-234-0604, email: support@vornadobaby.com

Install replacement fuse (C.) by first placing the end of the fuse into the fuse receptacle which is opposite of the blades of the plug, then carefully push in the other end. Only push against the metal end of the fuse, not the glass center portion. Close the fuse access cover (D.) by sliding the cover back into the plug until it is completely closed, latches and is flush with the face of the plug.

Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged.

READ AND SAVE THESE INSTRUCTIONS

Safety

Plug It In Safely! Your Breesi has a 6 ft. power cord, covered for additional safety. Vornado recommends placing product as close to an outlet as possible and securing the remaining cord.

Child Locking Switch
Keep Breesi Off when not in use.

Finger Friendly Design
Resists curious fingers.

No Pinch Points or Sharp Edges
To help protect a tumbling toddler.

No Exposure to Mechanical Parts
360° of protection.

Covered Power Cord Storage
Safely store power cord inside base of Breesi.

Device Controls

1. Power ( )
2. Fan ( - High, Low )
3. Control Lock ( )

Plug In & Placement

Power Cord Storage

For your convenience and safety the Power Cord Storage keeps the power cord neat and out of harms way.

1. Lift the Power Cord Storage flap to locate plug, then unwind the power cord stored inside.
   

Safety Tip: Power cords increase strangulation risks. Secure as much excess cord as possible inside the Power Cord Storage.

Set Up

1. Position your Breesi so the vortex beam of air is directed across the room, unobstructed.
2. Plug power cord into standard wall outlet.

Safety Tip: It is best to position the Breesi close to the power outlet and store excess power cord inside the Power Cord Storage.

How To Use

Breesi features a child-resistant switch, keeping the fan in parents' desired setting.

Lockable Controls

1. Push down and slide the Control Lock to power On and adjust fan speeds.
   

Operation

1. Select a desired Fan speed. Push and slide the Control Lock to High speed ( ) or Low speed ( ).
   
2. Adjust the airflow direction by pivoting the Breesi head.
   
3. Push down and slide the Control Lock to the ( ) position to power Breesi Off.
   

Note: When selecting speed, make sure the switch is fully engaged into the High speed, Low speed or Off setting.

Keeping the Unit Clean

Cleaning the Grill

1. Power Breesi Off and unplug.
2. Using a Phillips Head screwdriver, remove the screw located at the 6 o'clock position in the front of the grill.
   
3. Twist Grill counterclockwise to unlock and pull out.
   
4. Dust or vacuum the Grill and Blade.

Note: Do not use gasoline, thinners, solvents or other chemicals for cleaning. Do not wash in dishwasher.

Always unplug Breesi before starting any part of the cleaning process.

5. Reinstall Grill. Replace Grill onto Breesi and twist clockwise until the Grill aligns with the screw hole. Replace screw.
   

Cleaning the Blade

It is possible to remove the blade should something accidentally get wrapped around the motor shaft.

1. First, remove the nut from the shaft. Turn the nut clockwise to loosen. Pull the Blade straight out from the shaft.
   
2. When replacing, be certain the flat side of the shaft aligns directly with the corresponding flat side on the Blade's socket. Push the Blade all the way on the shaft. Do not use a hammer as this could result in bearing damage. Reinstall nut counter-clockwise until secure.
   

Tips

• During the off-season or after extended periods of non-use, you may choose to store your Breesi. To ensure long life of the product, it is recommended to store your Breesi by following these instructions:
  • Unplug power cord and wrap cord neatly inside the Power Cord Storage.
  • Thoroughly clean your Breesi. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust on Breesi or wipe down the entire surface with a soft cloth. You may also use a can of compressed air for debris.
  • Always set Power to Off and unplug Breesi before cleaning.
  • Cover, or place Breesi back into retail carton if available. This will prevent Breesi from accumulating dust over time.
  • Store Breesi in a cool and dry location.
• The motor is permanently lubricated and requires no oiling. Do not use gasoline, thinners, solvents or other chemicals for cleaning.
• Your Breesi has no user serviceable parts. Do not disassemble Breesi. This will void your warranty. If service is required, return your Breesi to Vornado (see WARRANTY for instructions).

Troubleshoot

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Vornado Breesi - Medium Nursery Air Circulator Manual