Silva ADC Summit User Manual page 60

15.4.1 Data Log Mode -
DEL?
06 MAR 2003
DATALOG
r001-0023
06 MAR 2003
2:10.30
Activated
r001-0023
Data Log Display
hold
1.
hold [mode]
[mode]
is displaying
DEL ALL ?
4.
YES
Activated
[set]
PC SYNC
START?
DEL ALL ?
NO
Inactivated
Setting Data Log Mode
flash
YES DEL?
06 MAR 2003
[set]
2:10.30 2:10.30
r001-0023
this data to
Inactivated
be deleted
Delete the Current Data
2.
[mode]
Auto-Log
Delete the
Interval
record that
Setting
[mode]
3.
Delete
PC Syn-
all record
[mode]
chronization
and data
Data Log Mode
Setting Sequence
PC SYNC ...
[set]
STOP?
if the send
Ready Sending
completed
PC Synchronization
To Select Setting Display
!
NO
Press and hold the [mode] button for about
2 seconds to select the Data Log Mode
Setting Display (the '
!
In setting display, press the [mode] button to
select among the settings following the
adjacent diagram.
1: When the '
[set] button to select between '
(delete the record that is displaying) and
NO
' ' Display.
2: When the interval digits starts to flash,
press the [set] or [reset] button to scroll to
[mode]
select the target auto-log interval (hold
down the button to scroll the setting at a
faster pace).
3: When the 'PC SYNC START?' starts to
flash, press [set] button to send the data
from the ADC to PC.
4: When the '
[set] button to select between '
all records) and '
!
When the above setting completed, press
and hold the [mode] button for about 2
seconds to confirm the setting and exit the
setting sequence.
NO
' starts flashing).
NO
' starts to flash, press the
NO
' starts to flash, press the
YES
NO
' Display.
YES
'
' (delete