Silva ADC Summit User Manual page 55

15.0 Data Log Mode -
B
data data data
Record
C
Record no. & Data no
Logging time & date
current
wind speed
ambient barometric
pressure
The Elements of a Data
Record and Data
MEMORY
FULL
Memory Full Display
Data Log Function
A
record
Free Memory Display
Data Log Display
ambient
temperature
altitude at the
current location
relative
humidity
Data Log Function
!
The ADC is equipped with a function to log
the sensor functional mode data. These
data are the current wind speed, ambient
temperature, barometric pressure, relative
humidity and the altitude at the current
location.
!
This data also includes the time and date
that the logging was taken.
!
The ADC can log data automatically (log a
data at a preset interval) or manually.
!
For logging data automatically, check the
'Automatic Data Log' section below. For
logging data manually, check the previous
'Manual Data Log'.
Note:
1) The log memory can log up to 256 records
and 1980 data.
2) If log memory is full, a '
message will display for few seconds. Delete
some data, or transfer the data to PC if
necessary.
3) Always check the memory level before data
logging.
MEMORY FULL
'