Silva ADC Summit User Manual page 34

12.5 Temperature Mode -
Wind Chill
Temperature
High Temperature Range
preset
wind chill
temperature
Low Temperature Range
level
0
The Wind Chill Temperature Alarm
Wind Chill Temperature Alarm
Wind Chill Temperature Alarm
!
The ADC is equipped with a wind chill
temperature alarm.
!
That alarm alerts user when the current
wind chill temperature is equal to or lower
than the preset wind chill temperature level.
Wind Chill Temperature Alarm Sound
'beep'
!
In Temperature Mode: When the Current
for 5
Wind Chill Temperature is equal to or lower
seconds
(every 2 than the preset wind chill temperature level,
minutes)
the ADC starts beeping for about 5 seconds.
!
After the first beeping, the ADC will beep
Time
again for every 2 minutes if the current wind
chill temperature holds at or below the preset
value.
!
The above repeated alarm will stop unless
the wind chill temperature equals or drops
below the preset value or the wind chill
temperature alarm is set to OFF.