Setting Relative Air Density - Silva ADC Pro User Manual

14.7.3 Altimeter Mode -
RAD SETTING
[mode]
TEMP 8 C
15.0
Temperature
Setting
[mode]
RAD SETTING
BARO hPa
1013.3
Pressure
Setting
[mode]
RAD SETTING
[mode]
HUMIDITY
80%
Humidity
Setting
Relative Air Density Setting

Setting Relative Air Density

[set]
temperature
Select the
setting by
forward scrolling
hold [reset]
Select the setting by
forward scrolling
(fast scrolling)
pressure
[reset]
Select the
setting by
backward scrolling
hold [set]
Select the setting by
relative
backward scrolling
humidity
(fast scrolling)
To Calibrate the Altitude
!
Following the previous 'Altimeter Mode
Setting Sequence' to enter the Relative Air
Density Setting Display.
!
When the one of the settings (temperature,
pressure and relative humidity) is flashing,
press the [set] or [reset] button to scroll by 1
to select the target value (hold down the
button to scroll the setting faster).
!
When the above settings finished, press the
[mode] button once to exit the setting
display, press and hold the [mode] button
for about 2 seconds to exit the setting
sequence or press the [mode] button to set
the other settings.
!
Note:
1) hen the above Relative Air Density setting
has been set, the Relative Air Density and
the Absolute Air Density will be calculated by
this setting.
2) The standard default values in the RAD
settings are 15.0° C, 1013.3hPa and 0%
RH.