Altitude Mode Setting - Silva ADC Pro User Manual

14.7.0 Altimeter Mode -
hold
[mode]
ALTITUDE m
144
734 80
hold
[mode]
Altitmeter Mode
Relative
Humidity
Altimeter Mode Setting Sequence

Altitude Mode Setting

[mode]
Altitude Altitude
Alarm Calibration
Setting Display
[mode] [mode]
[mode] [mode]
pressure temperature
Relative Air Density Setting
Altimeter Mode Setting
!
The following functions can be performed in
the Altimeter Setting Mode.
1) Altitude Alarm Settings,
a) ON or OFF
b) Target Altitude Level for alarm
2) Altitude Calibration ,
3) Relative Air Density Setting
a) Temperature
b) Pressure
c) Humidity.
To Select the Setting Display
!
o select the setting display, press and hold
the [mode] button for about 2 seconds
(altitude digits will start flashing).
!
In the setting display, press the [mode]
button to select between the Altitude Alarm
Setting, Altitude Calibration Display and
Relative Air Density Setting following the
adjacent diagram.
!
Check the 'Altitude Alarm Setting', 'Altitude
Calibration' and 'Relative Air Density
Setting' sections below for more detail on
the above settings.