Table of Contents
Advertisement
10.0 Sensor Functions Mode -
BARO
hPa
WIND Km/H
1001.3
18.3
Barometer Mode
Wind Mode
ALTITUDE m
144
734
80
Altitude Mode
Sensor Functional Mode
hold [set]
Record no. & Data no
Logging time & date
current
wind speed
ambient barometric
pressure
Data (The Elements of a Data)
TEMP
8
C
21.3
28.3
8.3
18.2
13.2
Temperature Mode
HUMIDITY
H.INX 50.2
8
C
88.2%
8
C
8
C
44.0
62.2
Humidity Mode
2 beeps
ambient
temperature
altitude at the
current location
relative
humidity
Manual Data Log Function
Data Log Function
!
The ADC is equipped with a function to log
the sensor functional mode readings. They
are the current wind speed, relative humidity,
ambient temperature, barometric pressure
and the altitude at current location.
!
The record also includes the time and date
that data was logged.
!
The ADC can log data automatically or
manually. Check the 'Automatic Data Log'
section below for more detail on how to log
data automatically.
To Log the Data Manually - Manual-Log
!
To log a data manually, press and hold the [set]
button for about 2 seconds in one of the
functional modes (Temperature, Wind Speed,
Barometer,
Altimeter and Relative Humidity
Mode).
!
When two beeps sounds, the record is logged.
!
You can log another record at any desirable
moment as long as there is sufficient memory.
!
Check the coming '
section for more detail on how to review the
logged data.
Logged Record and Data
'
Hide quick links:
Advertisement
Table of Contents
