Table of Contents
Advertisement
PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE INSTALLATION:
Carton or other heavy material for covering the counter top.
(for taping the templates to the wall)
Phillips screwdriver (for the screws)
Pencil
Flat blade screwdriver (for the bolts)
Measuring tape (metal preferred)
Small side cutters or tin snips
If you have brick or masonry walls, you need special hardware and tools.
The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.
Clear tape
Saber saw (for cutting vent
hloes for roof or wall venting)
Stud finder or thin nail.
Key hole saw (for the power cord hole)
3/8" and 3/4" wood drill bits
1/2" and 3/16"
drill bits
— 6 —
Electric drill
Plumb line
Duct Tape
Caulking gun
Advertisement
Table of Contents
