Sears Galaxy 85030 Installation Instructions Manual page 11

STEP 3:
PREPARE THE VENTING BLOWER
blower unit
Figure 15
ROOM-VENTED (Recirculating)
INSTALLATION:
1. Remove one blower unit mounting screw and
two blower plate screws. Remove the blower
plate from cabinet. See Figure 17.
2. Carefully lift the blower unit out of the microwave
oven.
3. Rotate blower unit so that the exhaust ports face
the front of the cabinet. See Figure 18.
4. Place blower unit back into microwave oven.
5. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the two blower plate mounting screws.
See Figure 19.
exhaust
ports
Figure 18
back plate
exhaust
ports
blower unit
blower unit
exhaust ports
blower unit
Parts "B"
blower unit
Parts "B"
Figure 19
— 11 —
blower plate
mounting screws
blower plate
blower unit
mounting screw
back plate
Figure 16
blower plate
mounting screws
blower plate
blower unit
mounting screw
back plate
Figure 17
blower plate
mounting screws
blower plate
blower unit
mounting screw
back plate