Siemens S56 User Manual page 107

Your service provider is displayed:
Display list of preferred
§List§
networks.
Create new entry:
• Select empty line, press §Entry§,
then select another entry from the
list of service providers and con-
firm.
Change/delete entry:
• Select entry, press §Change§, then
select another entry from the list
of service providers and confirm or
press §Clear§.
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast Search
When this function is active, net-
work reconnection is speeded up
(and standby time is reduced).
Setup
K
§Menu§
K
User Group
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for exam-
ple, or special tariffs may apply.
Check with your service provider
for details.
Activate
Activate/deactive function.
"User group" must be deactivated
for normal phone use (phone code,
L
page 19).
Select Group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
Outgo. Access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred Grp
If activated, only calls within this
standard user group can be made
(depending on the network
configuration).
K
Setup Network
Select function
107
L