Notes A-Z; Control Codes (Dtmf) - Siemens S56 User Manual

118
Battery quality statement
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As a
result the operating time of your mo-
bile phone may be considerably re-
duced, even after a full recharge of
the battery.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original bat-
teries.

Control codes (DTMF)

Sending conrol codes
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
; menu§
Open call menu.
Send DTMFSelect.
Use the Phonebook
Save phone numbers and control
codes (DTMF tones) in the Phone/
Addressbook like a normal entry.
J
Enter phone number.

Notes A-Z

0
J
0
J
§Save§
You can also store just the DTMF
tones (digits) without a phone num-
ber and send these during a call.
Dial-up access CSD
(Circuit Switched Data)
Data transfer is made via a data con-
nection to a default IP address of
your network provider or service pro-
vider. This connection can be used
for the exchange of data (e.g. for ac-
cess to the Internet or for download-
ing games and applications as well
as for using WAP services).
As long as this connection is estab-
lished to use services or to download
applications from the Internet,
charges for the connection accrue
according to the price list of your
network provider or service provider.
Press until a "+" appears
on the display (pause for
connection setup).
Enter DTMF signals
(digits).
If necessary enter further
pauses of three seconds
each to ensure correct
processing at destination.
Enter a name.
Press.