Operation; Intended Use - Scholl 26060 FB/4 Instructions For Use Manual

GBA C 2100 3 E
5 O
PERATION
The hot plate has a thermostat and an indicator lamp.
The thermostat switches the hot plate on and off and sets the temperature:
Thermostat off
Thermostat on
indicator lamp lit
indicator lamp dark
Hot plates with 2 separate heated zones have 2 thermostats and 2 indicator lamps.
5.1 I
NTENDED USE
Practice:
 Turn the thermostat to the maximum temperature (position "10").
 The heating time of the hot plate is approx. 45 minutes.
 After the heating time, the device is ready for operation and can be equipped with the foods to be
kept warm.
 The food must be preheated and must
 Please use suitable crockery for best heat performance.
 Set the thermostat to the desired temperature.
 For switching off after use of the hot plate:
 Turn the thermostat to the left in the position "0". The signal lamp goes out.
 Let the hot plate cool off.
Do not touch the device surfaces. The surfaces of the device may grow hot. Please
let the device cool off entirely before cleaning it. Do not cover the device.
Danger of burns and fire!
BA
Last revised 05-2020
Position "0"
(Number "0" is below the mark)
Position "1" to "10"
(Number "1" to "10" is below the mark)
Heating on
Heating off
not be deep-frozen!
Page 14 of 25 Mai 20, 2020
Rev. 3