Screen Saver; Call Setup - Siemens A70 User Manual

ther options please press the right
softkey.
®
T9 Text Input is licensed under one or more
of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928 and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
Setup
¢ ¢
§Menu§ Setup
Profiles
Three profiles are standard with default
settings, they can be changed however:
Normal envi., Quiet
You can set two personal profiles
(<No
Title>).
The special profile
changed.
Activate
Select default profile or personal profile
¢
§Select§.
Change setting
¢
Select profile
The list of available functions is displayed.
Aircraft mode
The phone will automatically switch off if
you select this profile. Even the alarm
tone is deactivated. An alarm is only
shown on the display. It is not possible to
modify this profile.
Normal operation
The next time you switch on the phone
and return to normal operation the de-
fault profile will be activated.
Select a function.
environ., Noisy environ.
cannot be
Aircraft mode
¢
§Options§ Change sett.
Display
Language
Set the language of the display text.
"Automatic" will set the language of your
home service provider. Reset to this lan-
guage in standby status:
A
# 0 0 0 0 #
*
Screensaver
The screensaver shows a picture on the
display as soon as a period that can be set
by you has elapsed. The function is ended
by an incoming call or by pressing any key.

Call setup

Hide ID
When switched off, the display of the call-
ing party shows your phone number (de-
pendent on service provider). To suppress
this display, you can activate the "Hide ID"
mode.
Call waiting
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it with
Minute beep
During the call, you will hear a beep after
each minute as a reminder of the time
elapsed.
Divert
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
Set up call divert (example)
All calls
All calls are diverted.
top line of the display in standby mode.
Unanswered calls
Includes Unanswered,
No reply, Busy.
¢ ¢
§Select§ Set
number to which the call should be
¢
diverted)
§OK§
Setup
Call waiting.
n
is shown in the
Not reachable,
J
(Enter the phone
7
b
b
b
b