Getting Started; Using The Sim Card/Battery; Charging The Battery - Siemens A62 User Manual

Getting started

2
Getting started

Using the SIM card/battery

Your phone's display is delivered with a
protective film. Remove this film before get-
ting started. The service provider supplies
you with a SIM card on which all the im-
portant data for your account is stored. If
the SIM card is credit card-sized, snap out
the smaller segment and trim any rough
edges.
Remove the battery cover upwards
1
2
Insert SIM card
the locating slot (make sure the angled
corner is in the correct position
push the retaining catch over the top of
4
the SIM card .
4
Insert the battery sideways into the
5
phone , then press downwards
until it engages.
1
and push it fully into
3
). Then
2
3
6
To remove, press the retaining tab
then lift the battery out.
Insert the battery cover by the tabs at the
8
.
bottom
until it engages.
Always switch off phone before removing
the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if you have
an older card.

Charging the battery

The battery is not supplied fully charged.
Plug the charger cable into the bottom of
the phone, plug the power supply unit
into a mains power socket and charge for
at least two hours.
6
7
, then press downwards
9
8
5
7
9
,