Dmx-Mode - EuroLite LED THA-60PC User Manual

Program
With this function, you can adjust the desired static colors and internal programs manually.
1. STATIC: Choose the desired static color and adjust the brightness (F:00-99)
2. CHANGE: Choose the color switching program and adjust the speed (SP:01-99) and the brightness
(F:00-99).
3. FADE: Choose the color fading program and adjust the speed (SP:01-99) and the brightness (F:00-99).
4. AUTO: Choose the auto program and adjust the speed (SP:01-99) and the brightness (F:00-99).
Sound
With this function, you can adjust the desired sensitivity manually (00-31).

DMX-Mode

Setting the DMX Starting Address:
Press the MODE button until the display shows Set ADDR. Press the ENTER button. You can select the
desired DMX address via the UP or DOWN buttons.
Confirm your choice by pressing ENTER.
Please, be sure that you don't have any overlapping channels in order to control each LED THA-60PC
Theater Spot correctly and independently from any other fixture on the DMX-chain. If several LED THA-
60PC Theater Spots are addressed similarly, they will work synchronically.
Controlling:
After having addressed the LED LED THA-60PC Theater Spot, you may now start operating it via your
lighting controller.
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If there is
no data received at the DMX-input, the display will flash.
This situation can occur if:
- the XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
The individual channels and their features are listed under DMX-protocol.
Setting DMX channel mode:
The device has 3 DMX channel modes.
Press the MODE button until the display shows Channel. Press the ENTER button.
You can select the DMX channel mode CH05, CH06 or CH07 via the UP or DOWN buttons.
Confirm your choice by pressing ENTER.
29/32 00095814, Version 1.0