Before operation
• Before operating this unit with the supplied remote control, refer to "Universal Remote Controls" on page 10 for
details about operation.
LISTENING T O A P R O G R A M
Before operation, enter the standby
mode.
1
Main unit
POWER
ON/OFF
In the standby mode, turn the power on.
2
RC
POWER ON
Switch the speakers on.
3
Main unit
SPEAKER
ON/OFF
Select the desired input source.
4
Main unit
INPUT
SELECTOR
or
• The STANDBY indicator lights up.
This means that the unit is not disconnected from
the AC mains and a small amount of current is
retained to support the operation readiness.
• To switch the power off, push the POWER switch
again. Then the power is cut off and the STANDBY
indicator goes off.
• Each time the POWER button on the remote control
is pressed, the unit is turned on to enter the
operating mode or off to enter the standby mode.
• In the standby mode, if the OPEN/CLOSE button is
pressed or an input source is selected, the unit can
be also turned on.
• The SPEAKER indicator lights up on the display and
the sound can be heard from the speakers
connected to the speaker terminals.
• When using the headphones for private listening,
press the SPEAKER button again to switch the
speakers off.
• Each time the INPUT SELECTOR button is
pressed, the input source changes as follows :
RC
INPUT
SEL.
13
TUNER
DVD
VIDEO 1
(frequency display)
AUX / TV
TAPE / MD
VIDEO 2