Advertisement
9.
SERVICING
9.1
Before sending the Tester 301 B for servicing ensure that the printed circuit board mounted fuses
have not ruptured and the batteries are not faulty.
Note:- Checking and replacement of batteries and printed circuit board mounted fuses is to be
carried out by authorised personnel only.
F1:-2A Quick Blow
F2:- 500mA Quick Blow
9. 2
Repairs within warranty period will be free of charge and should be sent to Edgcumbe Instruments
-full address below. However, out of the warranty period, the districts concerned will be invoiced
accordingly.
Before sending the Tester 301 B for servicing, ensure that the unit is switched off to avoid
damaging the battery. It would be of considerable help during repair if you wrote a brief description
of the fault on a label and firmly attached it to the Tester 301 B.
Tester 301 B for service should be sent to:-
Cartridge 20
5mm
x
Cartridge 20
5mm
x
Edgcumbe Instruments Ltd
Main Street, Bothwell,
Glasgow G71 BEZ
19
Advertisement
