Download Print this page
BT Tele 300B User Manual

BT Tele 300B User Manual

Digalert test telephone with loud speaker adsl compatible

Advertisement

Quick Links

Ground-start lines
On units fitted with optional third wire (item 315628):
t
TALK momentarily and check for dial tone. Ground start is then automatic and the green wire
can be left connected to ground, without affecting the call.
ELR: Earth Loop Recall
On units fitted with optional third wire (item 315628):
and with the green wire to ground, press
tone.
Care and repair
Field repair
Field repairs are limited to replacing line cords (with approved types), replacing belt clips, and
replacing batteries. Attempting any repair beyond this at field level is liable to damage the
instrument and will invalidate the manufacturers warranty. Check your company policy before
considering any repair. Although limited field repair may be possible your company may have a
policy of centralised repair.
Line-cord changing
Remove the three hatch cover screws. Replace the cord
terminal screws. Connect a new, standard cord as per the diagram. Tighten the screws firmly
but do not use excessive force. Make sure the battery cover sits down properly before securing
it with the 3 screws.
Line-cord storage
Wrap the line cord loosely around the handle or preferably make a few loops and pass them
through the belt clip.
Impact
Tele300B is highly impact resistant. Even if dropped from a great height onto concrete
Tele300B should survive without permanent damage. In the event that the gasket seal should
bulge out on impact it is usually possible to gently ease it back into position with a blunt tool. Do
not attempt to open the case to make a repair nor should any force be used or the gasket may
split. If a simple local fix is not possible it should be returned for repair.
Do not open the case.
Please note that the waterproof seal integrity can be damaged by a high impact. If in doubt,
please have your unit checked. Use of the unit while the seals are damaged may invalidate the
warranty.
Red / Ring / -Ve
Green
/ Earth
Black / Tip / +Ve
connect green wire to ground, press
while in TALK mode on a looped line
p
PULSE momentarily and check for second dial
(item 315629)
by loosening the
Plug-in Adaptors:
Adaptor Test 3B I/C 003965
Adaptor Test 4A I/C 003043
Tempo Europe Ltd.
Suite 8, Brecon House, William Brown Close,
Llantarnam Park, Cwmbran NP44 3AB, U.K.
(
+44 (0) 1633-627 710
4
+44 (0) 1633-627 711
š
tempo@klauke.textron.com
ü
www.tempo.textron.com
Tele 300B User Guide part n° 1201-03-2505 issue 9, 09/06
DigAlert
TM
Test Telephone with Loud Speaker
ADSL
compatible
BT Tele 300B
Item: 026578
i
Additional Information :
http://networks.intra.bt.com/cimradio/es/es_test/eppm_04-99/project_04-99.html
USER GUIDE
r
a
n
g
e

Advertisement

loading

Summary of Contents for BT Tele 300B

  • Page 1 Suite 8, Brecon House, William Brown Close, Llantarnam Park, Cwmbran NP44 3AB, U.K. +44 (0) 1633-627 710 +44 (0) 1633-627 711 š tempo@klauke.textron.com ü www.tempo.textron.com Black / Tip / +Ve Tele 300B User Guide part n° 1201-03-2505 issue 9, 09/06...
  • Page 2 Replace Red lead polarity: Battery Red: Talk Mode. LNR/PAUSE: Last Number Redial and Pause TALK MODE Green = B(-Ve). Green: Monitor mode. = A (+Ve). Press LNR/PAUSE immediately after off-hook to redial the previous Press TALK to go off-hook. A double beep is heard and the mode LED flashes number dialled.

This manual is also suitable for:

026578