Sherwood NewCastle R-671 Operating Instructions Manual page 46

When selecting the VIDEO SELECT
• Only when one of TUNER, CD, TAPE, AUX and EXTERNAL IN is selected, you can select a video
input source on the VIDEO SELECT menu and enjoy the audio and video signals separately.
• When dubbing them onto VIDEO 1, select either VIDEO2 or VIDEO 3 on the VIDEO SELECT menu.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the VIDEO SELECT, then press the
1
ENTER button.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired video input
2
source.
When selecting the TONE CONTROL
■Note: When the digital signals from DTS, Dolby Digital or MPEG program sources are input or the
EXTERNAL IN is selected as an input source, you cannot select the TONE CONTROL and can
hear a program source without the tone effect.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the TONE CONTROL, then press the
1
ENTER button.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired mode.
2
■Note :
• Only when the TONE CONTOL mode is set to
on, the tone(BASS and TREBLE)modes can be
select.
45