18. Power on the receiver. With the receiver still in the "STANDBY" mode (orange LED visible), hold the
'ROOM2' button and 'TONE MODE' button simultaneously to re-set the microprocessor. Turn on the
receiver by pressing the 'STANDBY' button. (Blue LED)
19. If the display reads 'FM 87.5MHZ' the re-set was completed successfully. If not, repeat Step 18.
20. Once you have finished the upgrade and reset process, you will need to program the unit's settings according
to the devices you have connected.
If you have problems and cannot load the new firmware, please contact Sherwood technical support at (800) 962-
3203 ext 115. This number is available during normal business hours, 8:00 AM to 5:00 PM, Monday to Friday,
Pacific time.