Download Print this page

Listening To A Cassette Tape - Sharp XL-MP130 Quick Start Manual

Sharp xl-mp130 stereo systems: quick start
Hide thumbs Also See for XL-MP130:

Advertisement

4
Turn on your system
Conexión de la alimentación de su
sistema
The first time the unit is plugged in, the unit will enter the dem-
onstration mode. You will see words scroll.
Cuando se enchufe por primera vez el aparato, se establecerá en
el modo de demostración. Verá un desplazamiento de palabras.
1
Press the X-BASS/DEMO button to cancel the demonstra-
tion mode.
Pulse el botón X-BASS/DEMO para cancelar el modo de
demostración.
2
Press the ON/STAND-BY button to turn the power on.
Pulse el botón ON/STAND-BY para conectar la alimentación.
Listening to the radio
Audición de la radio
1
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
Pulse repetidamente el botón TUNER (BAND) para seleccionar la banda
de frecuencias deseada (FM o AM).
2
Press the TUNING (
or
tion.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first re-
ceivable broadcast station.
Pulse el botón TUNING (
Cuando se pulse el botón TUNING durante más de 0,5 segundos, la
exploración se iniciará automáticamente y el sintonizador se parará en
la primera emisora difusora que pueda recibirse.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
"
" will appear when an FM broadcast is in stereo.
Para recibir una transmisión de FM en estéreo:
Pulse el botón TUNER (BAND) para que se visualice el indicador "ST".
"
" aparecerá cuando una difusión de FM sea en estéreo.
FM stereo mode indicator
Indicador del modo de FM
en estéreo
FM stereo receiving indicator
Indicador de recepción de FM
en estéreo
) button to tune in to the desired sta-
o
) para sintonizar la emisora deseada.
Listening to a CD or MP3/WMA disc
Audición de un disco CD o MP3/WMA
1
Press the CD button.
Pulse el botón CD.
2
Press the
1 button and within 5 seconds, press the
CLOSE button to open the disc tray 1.
Pulse el botón
1 y antes de 5 segundos, pulse el botón
CLOSE para abrir la bandeja de discos 1.
3
Place the disc on the disc tray 1, label side up.
Coloque el disco compacto en la bandeja de discos 1, con el lado de la
etiqueta hacia arriba.
4
Press the
OPEN/CLOSE button to close the disc tray 1.
Pulse el botón
OPEN/CLOSE para cerrar la bandeja de discos 1.
5
You can place discs on trays 2 - 5 by following steps 2 - 4.
Podrá colocar los discos en las bandejas 2 - 5 siguiendo los pasos 2 - 4.
6
Press the
/
button to start playback.
Pulse el botón
/
para iniciar la reproducción.

Listening to a cassette tape

Audición de una cinta de cassette
1
Press the TAPE button.
Pulse el botón TAPE.
2
Open the cassette compartment by
pushing the area marked "
EJECT".
Abra la puerta el cassette compartimiento
la parte marcada "
PUSH EJECT ".
3
Load a cassette into the cassette
compartment with the side to be
played facing you.
Cargue un cassette en el compartimiento del ca-
ssette con la cara a reproducirse encarada hacia
usted.
4
Press the
/
button to start playback.
Pulse el botón
/
para iniciar la reproducción.
5" (12 cm)
3" (8 cm)
12 cm
8 cm
PUSH
OPEN/
OPEN/

Advertisement

loading