Sharp CD-ES770 Operation Manual page 25

Recording from a CD (CDs)
You can record the desired CD using the DIRECT PLAY button.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the DIRECT PLAY button to start
recording.
Recording is started from the selected CD. When the
playback of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
CD playback will start approximately 7 seconds after the
tape starts.
To stop recording:
Press the (TAPE ) button.
The CD and tape will stop.
CD-ES770
25