Table of Contents
Advertisement
Available languages
Available languages
Instruction manual
Window Slider Kit Installation
•
Adjust the width (picture 1) or height (picture 2) of the windows
slider(11) to fit the window opening and fixate the position of the
windows slider(11) with the fixing plugs.
•
Slide the window up to the slider.
10
CLEANING MAINTENANCE
•
Before cleaning, disconnect the unit from any electric supply
outlet.
•
First clean the surface with a neutral detergent and wet cloth, and
then wipe it with a dry cloth.
•
Do not use gasoline or other chemicals to clean the unit.
•
Do not wash the unit directly.
Air filter
•
The air filter should be cleaned once every two weeks.
•
Open the air inlet grille and take off air filter.
•
Clean the air filter with neutral detergent in lukewarm 40°C water
and allow to dry (not in direct sunlight).
•
Re-install the air filter into the inlet grille.
TROUBLESHOOTING
Troubles Possible Causes
The unit
•
Water full indicator
does not
lamp blinks and water
start
tank is full.
when
•
Room temperature is
pressing
higher than the setting
power
temperature.(Electric
button.
heating mode)
•
Room temperature is
lower that the setting
temperature.(Cooling
mode)
Suggested Remedies
•
Drain the water out of the
water tank.
•
Adjust the temperature.
Advertisement
Table of Contents
