Call Park - Samsung SMT-6011 User Manual

Call Park

You can reconnect a call that is held during call by pressing a button or function code.
Call Park (Extension)
Since an extension number is used as the hold ID, only one call can be held per
extension number.
You can hold a call to an extension number as follows:
- After pressing the [Hold] button of Supplementary Function menu during call, Dial
'Call Park' function code + Target extension.
- After pressing the [Hold] button of Supplementary Function menu during call, Dial
'Call Park' function code with the extension number.
Call Park Orbit
Because an independent number is used as a hold ID, one extension can hold
several calls. You can hold calls to a number as follows:
- After pressing the [Hold] button of Supplementary Function menu during call, Dial
'Orbit Park' function code + call saving number.
Parked Call Pickup
This feature allows a parked call to be reconnected on the phone for it had been
parked or on another phone.
You can reconnect a held call as follows:
- Dial 'Parked Call Pickup' function code + Hold ID.
Park Recall
This feature allows a parked call to be redirected to the subscriber who parked the
call if the call is not picked up after a specified period of time.
Shared Call Retrieve
This feature is used to pick up a held call from another phone.
If there is a held call, it is displayed on the right side of screen. You can use Shared
Call Retrieve as follows:
- Press the right selection button after locating the held call.
- Dial 'Shared Call Retrieve' function code.
SMT-i6010/6011 User Guide _
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | sales@TelecomHunter.nl | www.TelecomHunter.nl
91