BenQ MS500+ User Manual page 40

Function
Quick Auto
Search
Presentation
Timer
Language
Projector
Position
Menu
Settings
Operation
Settings
40 Operation
See "Switching input signal" on page 23
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 30
Sets the language for the On-Screen Display (OSD) menus. See
the menus" on page 20
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets the reminder messages on or off.
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
45 for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
page 31 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Description
for details.
for details.
"Choosing a location" on page 13
"Setting Auto Power Off " on page
for details.
"Using
for details.
"Hiding the image" on