BenQ MS500+ User Manual page 38

Description of each menu
Function
Wall Color
Aspect Ratio
Keystone
Position
Phase
H. Size
Digital Zoom
3D Sync
3D Sync
Invert
38 Operation
Corrects the projected picture's color when the projection surface is not
white. See "Using Wall Color" on page 27
There are several options to set the image's aspect ratio depending on
your input signal source. See
details.
Corrects any keystoning of the image. See
page 23 for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available when a PC
signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See
searching for details" on page 24
This projector features a 3D function which enables you to enjoy the
3D movies, videos, and sporting events in a more realistic way by
presenting the depth of the images. You need to wear a pair of 3D
glasses to view the 3D images.
• Only for PC type signal:
When the vertical frequency is 120Hz, and the content being projected
is made with 3D technology, selecting Frame Sequential will present the
3D images.
When the 3D Sync function is on:
• The brightness level of the projected image will decrease.
• The Picture Mode cannot be adjusted.
• The Keystone can only be adjusted within limited degrees.
When you discover the inversion of the image depth, enable this
function to correct the problem.
Description
for details.
"Selecting the aspect ratio" on page 24
"Switching input signal" on
"Magnifying and
for details.
for